Fixes

CRITICAL_OBJECT_TERMINATION error in Windows 10


5. Run DISM

5.1. Standard way

  1. Right-click Start and open Command Prompt (Admin).
  2. Paste the following command and press Enter:
    • DISM /Online /Cleanup-Image /RestoreHealth
  3. Wait until the scan is finished.
  4. Restart your computer and try updating again.

And the third troubleshooter we’re going to use is DISM. Deployment Image Servicing and Management (DISM) is a powerful tool that reloads the system image. So, it can also resolve potential BSOD errors.

We’ll walk you through both standard and the procedure that utilizes the installation media below:

5.2. With the Windows installation media

  1. Insert your Windows installation media.
  2. Right-click the Start menu and, from the menu, choose the Command Prompt (Admin).
  3. In the command line, type the following commands and press Enter after each:
    • dism /online /cleanup-image /scanhealth
    • dism /online /cleanup-image /restorehealth
  4. Now, type the following command and press Enter:
    • DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess
  5. Make sure to change an X value with the letter of the mounted drive with Windows 10 installation.
  6. After the procedure is finished, restart your computer.

If you are sick of getting a message error when you are trying to run DISM, rely on this guide to fix it.


6. Remove problematic applications from your PC

Third-party applications can often cause Blue Screen of Death errors, and users reported that Comodo Optimizer was the cause for CRITICAL_OBJECT_TERMINATION error.

According to users, after removing the Comodo Optimizer the issue was resolved, so be sure to remove this software if you have it installed.

Another common cause for this error can be your antivirus or firewall, so we advise you to temporarily uninstall any third-party antivirus programs that you have installed.

Run a System Scan to discover potential errors

Restoro Scan

Click Start Scan to find Windows issues.

Restoro Fix

Click Repair All to fix issues with Patented Technologies.

Run a PC Scan with Restoro Repair Tool to find errors causing security problems and slowdowns. After the scan is complete, the repair process will replace damaged files with fresh Windows files and components.

Windows 10 comes with Windows Defender that works as a default antivirus, so even if you remove your third-party antivirus, your PC won’t be completely defenseless.

We have to mention that uninstalling the antivirus software might not fix the problem, so be sure to use a dedicated removal tool and remove all files associated with your antivirus.

If removing the antivirus fixed the problem, you can now reinstall your antivirus or you can switch to a different antivirus program.

You can also access the BSoD file log location in order to find out the main reason why your PC crashed and what actual program is causing this annoying error.


7. Update your SSD firmware

Many users reported that CRITICAL_OBJECT_TERMINATION error was caused by outdated SSD firmware, and in order to fix this error, it’s recommended that you update the firmware on your SSD.

Updating your firmware is an advanced procedure, and it can cause damage to your SSD if you’re not careful, therefore be extra careful if you decide to update SSD firmware.


Check the best SSD management software for Windows so you can have your hard drive always functioning at optimum capacity.


8. Disable TRIM on your SSD

  1. Press Windows Key + X on your keyboard to open Power User Menu and choose Command Prompt (Admin) from the list.
    critical-object-termination-admin
  2. When Command Prompt opens, insert the line below and press Enter to see if TRIM is enabled or disabled. If you get 0 as a result, it means that TRIM is enabled and you need to disable it. fsutil behavior query DisableDeleteNotify
    critical-object-termination-trim-1
  3. If TRIM is enabled, insert the line below and press Enter: fsutil behavior set DisableDeleteNotify 1
    critical-object-termination-trim-2
  4. Close Command Prompt.

According to users, disabling TRIM can sometimes help you with CRITICAL_OBJECT_TERMINATION error. Bear in mind that this is just a workaround, but it might be helpful to you.


9. Turn off Hotplug for SATA devices

Few users reported that theCRITICAL_OBJECT_TERMINATION BSoD this issue can be fixed by turning off Hotplug for SATA devices in BIOS.

To see how to enter BIOS and how to turn off Hotplug for SATA devices, we strongly advise you to check your motherboard manual for detailed instructions.

We also recommend you stay informed on the factors that usually are at the root of this problem. Check out this ultimate guide on the all the causes that generate the BSoD error.


10. Check your swappable SATA board

Many SSD drives come with swappable boards that you install in your PC and use them to connect your SSD.

Sometimes these boards might stop working, and you’ll have to replace the faulty SATA board with a new one. Alternatively you can just connect your SSD directly to the SATA port on your motherboard.


11. Set the Drive mode to ATA in BIOS

Sometimes CRITICAL_OBJECT_TERMINATION error can be caused by certain BIOS setting, most commonly Drive mode.

According to users, you need to change the Drive mode in BIOS to ATA in order to fix this error. For detailed instructions, we strongly suggest that you check your motherboard manual.

As an alternative solution you can also try some high-quality specialized software that can get you of the predicament, so you should take a look at this article on the best BSoD repair tools.


12. Replace your SATA cables

Few users reported that this error was caused by SATA cables, and according to them, replacing the SATA cables fixed the Blue Screen of Death error, therefore we strongly advise you to check and replace your SATA cables.

CRITICAL_OBJECT_TERMINATION BSoD error is often caused by your hard drive or SSD, and if you’re having this problem, we strongly suggest that you try some of our solutions.

idee restoro
Still having issues?
Fix them with this tool:
  1. Download this PC Repair Tool rated Great on TrustPilot.com (download starts on this page).
  2. Click Start Scan to find Windows issues that could be causing PC problems.
  3. Click Repair All to fix issues with Patented Technologies (Exclusive Discount for our readers).

Restoro has been downloaded by 0 readers this month.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button