If you encounter any problems while running SFC, it stops or does not work at all on Windows 10, you can use our dedicated guide in order to solve the error.
4. Run the DISM tool
- Follow the first two steps from the above solution to open Command Prompt as admin.
- Paste the following command and press Enter:
- Wait until the scan is finished.
- Restart your computer and try updating again.
And the final troubleshooter we’re going to use is DISM. Deployment Image Servicing and Management (DISM) deploys the system image all over again, resolving potential issues along the way.
There are times when the DISM tool fails on Windows 10. If this happens to you, we recommend you check our dedicated guide to fix the error.
5. Uninstall/reinstall your antivirus software
It was reported by users that Norton antivirus can often cause RDR_FILE_SYSTEM error to occur. Apparently, Norton has some minor issues with Windows 10.
In order to fix the aforementioned error you need to completely uninstall Norton antivirus from your PC. In order to remove all remaining Norton files, you should use Norton Removal Tool.
Although Norton is confirmed to cause this issue, another antivirus can also cause RDR_FILE_SYSTEM error. It’s advised that you remove any antivirus software that you currently have installed.
Many antivirus companies offer uninstaller tools for their software, so make sure to download them and use them to completely remove a certain antivirus.
After you’ve uninstalled your antivirus software, you can reinstall it again, but be sure to use the latest version, since the latest version will probably have most of the older bugs fixed.
Alternatively, if the error does not appear after you uninstall it, we recommend you to install another antivirus program.
6. Remove any recently installed software
RDR_FILE_SYSTEM BSoD error can be caused by incompatible software, and if you recently installed any third-party software, that software can be the cause of this error.
To fix this issue, we advise you to uninstall any software that you installed a few days before this issue occurred.
Most commonly BSoD errors are caused by antivirus, VPN, or overclocking software, so if you’re using any of those, make sure that you uninstall them.
In some rare cases, even recently installed drivers can cause BSoD error to appear. If you installed any new drivers in the past, make sure to remove them or to rollback to the previous version.
7. Run the chkdsk command
- Go to Search, type cmd, and open Command Prompt as Administrator.
- Once the Command Prompt starts, enter the
chkdsk /f /r C:
- You can replace C with the letter that matches your hard drive partition. You might have to restart your computer in order to perform chkdsk for the C drive, so keep that in mind.
- If you cannot access Windows 10 due to RDR_FILE_SYSTEM error, restart your computer a few times while it boots. This should start Automatic Repair process.
- Choose Troubleshoot > Advanced options > Command Prompt.
- When Command Prompt starts enter the following comand
chkdsk /f /r C:
- Be sure to perform chkdsk for all hard drive partitions that you have.
In certain cases, these errors can be caused by corrupted files and folders on your hard drive, therefore you need to perform a chkdsk command.
If Automatic Repair couldn’t repair your Windows 10 PC, you can take a look at our dedicated guide and easily solve the error.
8. Check your hardware
- Download MemTest86+.
- Burn the tool to a CD or create a bootable USB flash drive.
- Connect the CD or USB flash drive and boot your PC from it.
- Let the MemTest86+ run for a couple of hours.
- If any errors are found, it means that one or more RAM modules are corrupt and that you need to replace it.
Often the cause for RDR_FILE_SYSTEM is faulty hardware, most commonly RAM. Users reported that after replacing the faulty RAM module, the issue was permanently fixed.
In order to check your RAM, follow the above steps. In addition to RAM, almost any other hardware component can cause this BSoD error to appear.
It’s also worth mentioning that any recently installed hardware can cause RDR_FILE_SYSTEM BSoD error if that hardware isn’t fully compatible with your motherboard.
To diagnose the problem, you should replace recently added hardware and check if your PC works without it.
RDR_FILE_SYSTEM BSoD error can create certain problems on Windows 10, but you can fix this error easily by following one of our solutions.
If you want to share with us your suggestions or if one of the solutions helped you, please leave us a comment bellow.