What can I do if SATA SSD is not listed as boot options?
1. Use AOMEI Backupper
If your SATA SSD is not listed in boot options, it’s possible that you didn’t clone your disk properly. To avoid these types of issues, it’s advised to use a reliable backup software such as AOMEI Backupper.
The software offers system backup, so it will be able to create an identical system backup and move it to your SSD. Of course, you’re not limited just to system backup, and you can back up both disks or partitions.
AOMEI Backupper also supports file sync and file backup, and you can even schedule backups or create event-triggered backups. Of course, incremental and differential backups are available as well.
The application has a hot backup feature, so you can create backups in the background without disrupting your other tasks.
Overall, AOMEI Backupper is a great software if you need to clone your operating system to a new SSD drive, so be sure to try it out.
Other great features:
- Ability to store backups on external storage, optical disks, NAS, or the cloud
- Command-line support
- Selective file restore from image files
- Flexible disk cloning
- Bootable rescue media
AOMEI Backupper is advanced backup software that can easily clone your system drive to an SSD.
2. Check your BIOS settings
- Enter BIOS. Keep in mind that different devices use different shortcuts for accessing BIOS.
- Enable the CSM option.
- Now set the SATA mode to AHCI.
After doing that, you should be able to see your SSD in the boot options. To see how to locate and change these settings, be sure to check your motherboard manual.
3. Try starting the system with only SSD connected
- Disconnect your computer case from the power outlet and open it.
- Now disconnect all drives except your SSD.
- Try to boot again.
- If your system boots, connect other drives and check if the problem is resolved.
Keep in mind that this solution might void your warranty if your computer is prebuilt.
Note: Some users reported that connecting the SSD to the SATA port 0 and hard drive to the SATA port 1 fixed the problem for them, so be sure to try that as well.
Also, make sure that your SSD drive is tightly connected to both data and power cable.